search

EverFocus EBC890 Manual de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
46
4646
46
Press numeric keys 1~4 to toggle the status of corresponding arm zone between Y/N. Press
to confirm. Press to exit without effecting any change.
Set ARM Delay Time
When an arm operation is executed, all active arm zones will enter ARM enabled status only
after a certain time delay, which is defined as ARM delay time. When an ARM enabled card is
swiped to pass a door, system will not generate an alarm within the time delay period so that
cardholder has time to disarm the system. The details to set ARM delay time is as follows. The
following window appears after entering the Arm zone menu.
Press to set ARM delay time. System will display the current delay time as shown below.
Use numeric keys to enter the desired ARM delay time. Enter minutes as a 3-digit number
0~999 and seconds as a 2-digit number 0~59. The default value of ARM delay time is 1 minute.
Press to confirm. Press to clear the minute field and second field or exit without
effecting any change.
Alarm Output Mode
Alarm output mode defines how the two alarm output relays respond to the alarm input. Two
alarm output modes are available from fingerprint controller: Timeout or transparent.
• Timeout mode indicates the alarm output will be triggered valid and the alarm output
relay will stay energized till a fixed time period passed. The default time period of the
alarm output is 1 minute. Users can change this value from the configuration.
• Transparent mode indicates the alarm output relay will stay energized as long as the
alarm input is valid.
Press under the below screen to enter the alarm output mode setting:
Press to toggle between “Timeout” mode and “Transparent” mode. Press to exit.
Alarm Output Mode
Alarm Output Mode Alarm Output Mode
Alarm Output Mode
Setting
SettingSetting
Setting
Arm delay time:
Arm delay time:Arm delay time:
Arm delay time:
001Min 00 Sec
001Min 00 Sec001Min 00 Sec
001Min 00 Sec
ARM Delay
ARM DelayARM Delay
ARM Delay
Setting
SettingSetting
Setting
1234
12341234
1234
YYYY
YYYYYYYY
YYYY
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

Comentarios a estos manuales

Sin comentarios
  • YA Ezwatch Jada-toys Meta Phase-research
  • Shure Antenas de la red Philips Transmisores De Fm ONKYO Accesorios reproductores de mp3 / mp4 Clarion Receptores de medios de coches Jabra Cargadores De Bateria
  • HP ENVY 5543 All-in-One Printer Ducky Shine 3 DK9008S3 Davis Vantage Pro Console Code CR 2500 Acer Aspire 3630
  • Ariston LFT 216 Instrucciones de operaciones Acer X193HQ Manual de usuario Panasonic DMCFS62 Manual de usuario Samsung 740T Manual de usuario Philips 17S1SB/00 Manual de usuario