EverFocus EBC890 Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
20
2020
20
TCP/IP Based System
It is also possible to network the controller via TCP/IP in order to remotely manage the
controller over internet or intranet. This is accomplished using the EverAccess LAN adaptor
(part number EA-LAN1) to convert RS232 /RS485 signals to TCP/IP.
Fig. 23 diagrams this
type of installation.
ARM
ENT
0
CLR
WXYZT U V
PQRS
M N OJ K LG H I
3
D E F
A B C
21
4
5 6
987
SYS
Serial
10Base-T Reset 9-30vdc
ENT
ARM
EverAccessEverAccess
SYS
7 8 9
65
4
1 2
A B C
D E F
3
G H I J K L M N O
PQRS
T U V WXYZ
CLR
0
Fig. 23. Diagram for TCP/IP based System
The following is a step by step guide to setting up an EA-LAN1 network adaptor.
Step 1: Install the EA-LAN1 software on the Installation PC using the CD included with the
EA-LAN1. Make sure that the installation PC is connected to the network that will be used to
manage the controller.
Step 2: Connect the EA-LAN1 to the local area network using a LAN cable, and power up
the EA-LAN1.
Step 3: Using the software that you installed in Step 1 on the Installation PC, locate the EA-
LAN1 on the local area network and change the IP address on the EA-LAN1.
Step 4: Configure the EA-LAN1 as described in the detailed description later in this guide.
Step 5: Connect the EA-LAN1 to the controller. (Note: Perform this step only after
successfully completing steps 1-5)
Step 6: Install the “COM Port Simulatordriver on the Admin PC using the CD included with
the EA-LAN1, and map the COM Port to be used.
Step 7: Confirm that the controller is now available on the network. At the Admin PC, open
the EverAccess Flex Software and connect to the controller using the COM Port mapped in
Step 7.
RS485
WAN/LAN
TCP/IP
TCP/I
P
RS485 to TCP/IP
converter
Controller
Controller
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Comentarios a estos manuales

Sin comentarios