EverFocus EBC890 Manual de usuario descargar pdf (Pagina 45)

3737

Change Card Number for a User

Under the following menu, press to change users’ card number:

Present the new card or manually enter new card number at the below screen:

Press at this window to exit without changing. If the new card is accepted successfully, the

setup is complete and the below window will be shown.

If the new card is being used by another user, the below window will be shown.

Set User PIN Setting

Each card in the EverAccess access control system is associated with a 6digit PIN. The PIN

status can be set as enabled or disabled and if enabled, user is required to enter the PIN every

time he enters/exit the door if the reader is a keypad reader and PIN is required by the door

access mode. Press under the below window to enter the set PIN setting.

Enter new PIN as following instruction and repeat it in the next window, shown as below

samples. Note the PIN must be 6 digits. Press to confirm ，press to exit without

saving.

User already existed

User already existedUser already existed

User already existed

Setting updated

Setting updated Setting updated

Setting updated

successful

successfulsuccessful

successfully

lyly

Repeat New PIN:

Repeat New PIN:Repeat New PIN:

Repeat New PIN:

______

____________

______

Input New PIN:

Input New PIN:Input New PIN:

Input New PIN:

______

____________

______

Set PIN

Set PINSet PIN

Set PIN

Input New Card #:

Input New Card #:Input New Card #:

Input New Card #:

________

________________

________

Set Card Number

Set Card NumberSet Card Number

Set Card Number

Data modified

Data modified Data modified

Data modified

successfully

successfullysuccessfully

successfully

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

Comentarios a estos manuales

Sin comentarios

EverFocus EBC890 Manual de usuario Pagina 45

Comentarios a estos manuales