EverFocus Flex1.0 Manual de usuario descargar pdf (Pagina 53)

EverFocus Navigation Access Control Management Software

4.1.5.1 Door setting

On the door setting page, the user can set the door of corresponding controller, including:

location of door, door opening time and door opening expiration time.

Location of the door: indicates the location of the door, the user may name as desired.

Door opening time: indicates the duration of the door in opening state when a door access is

permitted.

Door opening timeout: indicates the delayed time to trigger the timeout alarm event when the

door in opening state exceeds the set time, the delayed time is the door opening timeout time.

Operating procedure:

1) Click door tab.

2) Select the door to be set in the door list.

3) Input the door information in the door information box, including: door location, opening

time, opening timeout and interlocking and so on. Interlocking means the interlocked door

cannot be opened when a door is opened. For example: set door to interlock with door 4, 5,

6, 7 and 8, then No. 1 cannot be opened when any of the door 4, 5, 6, 7 and 8 is in open

state.

4) Click the “Modify” button to change the related information of the door.

4.1.5.2 Setting of reader

The user may configure the reader of the controller selected on the reader setting page. Reader

settings include: door location, keyboard reader, system reader, input/output reader and so on.

Keyboard reader: indicates whether this reader is a keyboard reader. When a reader requires

password function, it must be set to a keyboard reader.

Input/outlet: indicates that the reader is an input reader or an output reader.

System reader: used to identify whether the reader is a system reader.

Source area: used to define the source area corresponding to the reader. Used for

anti-Pass-Back of the controller door.

Destination area: used to define the destination area corresponding to the reader. Used for

anti-Pass-Back of the controller door.

Operating procedure:

1) Click the reader tab.

2) Select the reader to be set from the reader list.

3) Select the reader information in the reader information box, including: door location,

keyboard reader, system reader, input/output reader and so on.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 139 140

Sin comentarios

EverFocus Flex1.0 Manual de usuario Pagina 53