EverFocus EMV800 Manual de usuario

User Manual EEMMVV11220000//880000 DDVVRR

2 Optional External EDGE/GPRS/CDMA/WI-FI Modules for cellular/specialized wireless Transmission  GPS function tracks speed and geographic limits

925.4 Virtual Ports A port number represents a "channel" or entryway for network communications. Port numbers allow different computers

93 The modem/router was either installed by your Internet service provider or purchased by you to establish a connection to the Internet. A router a

94 2. Direct High Speed Modem Connection: A direct modem connection uses a standard network cable to connect the modem directly to a computer (or i

95 Connection Procedure:  The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have never made a cross-ov

96

97

98  Click on the option that says “Use the following IP address”  Assign an IP address of 192.168.1.2, a Subnet Mask of 255.255.255.0, and a

995.8 Direct High Speed Modem Connection Straight Through Ethernet Cable Pin outs: The Figure below shows the pin configurations for a straight

100 Log into the EverFocus DVR menu and go to the Network Setting Menu.  Input the Static IP address, the Subnet Mask, and the Gateway that yo

1015.9 Router or LAN Connection Straight Through Ethernet Cable Pin outs: The Figure below shows the pin configurations for a straight cable.

31.3 SPECIFICATIONS EMV1200 / 800 – 12 / 8 Channel Mobile DVR Video Format NTSC/PAL (auto detected by system) Operating System Embedded Linux with

102  Once you have a straight through cable plug one end into the LAN port on the back of the recorder and the other into the router.  Log into

103number of the IP address. For example, if the IP address of the computer is 192.168.2.101, the DVR’s IP address should be 192.168.002.050.  T

1046 REMOTE OPERATION FROM BROWSER 6.1 CONNECTING TO EMV1200/800 To access the DVR from a computer, open an Internet Explorer window and in the addr

105 The default user name is “admin”. The default password is “11111111”.  Click on the Login button and you will log in to the recorder’s Netw

106 Once the file finishes installing, you will return to the screen like the one below.

107Right click on the yellow bar and select “Run Add-on…” Install the MSXML file when prompted to do so. Now, you will able to see the remote

1086.2.2 Enabling ActiveX Controls Note: This section is only necessary if you DO NOT see the yellow ActiveX bar at the top of your browser screen w

109 In the Security Settings window, scroll to “ActiveX controls and plug-ins” Set the controls as follows: “Enable”:  Allow previously unused

110Close the window so you are back at the login screen. Click the Refresh button to reload the page. Install the ePlusDVR.cab file when prompt

1116.3 GREMOTE LIVE VIEW 1. Click on a camera number on the left side of the display to switch that camera to full screen. Click on “4UP” to dis

4Camera resolutions and record rates can be set individually per camera through OSD menus up to the maximum total record capacity of 480 (400)/ 960(

112 Alarm/Event Setup Date/Time Setup Display Setup Network Setup System Setup Information Setup Copy Menu Search Menu 5. In the main pa

1136.4 REMOTE PLAYBACK To playback the video, click the “Search” button. Select from “Time Search”, “Event Search”, or “Motion Search”. For more d

1147 EVERFOCUS DDNS SETUP Setup Steps: Step 1. Set up the Network Menu according to the instructions detailed in the Networking chapter. (Make s

115 Step 5. You should now be able to connect by typing the name you created into the address bar. Example: http://hostname.everfocusddns.com It

1168 LINKSYS & D-LINK PORT FORWARDING 8.1 TYPICAL LINKSYS PORT FORWARDING This section will cover a few simple configurations for the Linksys

117 Applications and Gaming allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specia

1188.2 TYPICAL D-LINK PORT FORWARDING This section will cover a few simple configurations for the D-Link router. This chapter is only to offer som

119Click Virtual Servers on the left to bring up the following screen. Virtual Servers allows users who are connecting remotely to access service

120Here is an example of the information for each service: Name Private IP Protocol Private Port Public Port Schedule HTTP 192.168.1.50 Both 80 8

1219 TROUBLESHOOTING If you have problems with the system, run through the following checklist to see if you can solve the problem.  The DVR w

51.4 FRONT PANEL Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding buttons on the include

122 Make sure you are using the correct WAN IP address given by the ISP, or, if you have a Dynamic IP, check if the IP address has changed; use DD

123APPENDIX A: TIMING OF ALARM MODES Transparent Mode Input EventAlarm Durationtt Event = t Reaction t Event: Duration of alarm input source (mo

124Timeout Mode tInput EventAlarm Durationt Duration = t Reactiont Event t Event: Duration of alarm input source (motion, contact, system events

125Timeout Mode: Retrigger of Alarms t Event: Duration of alarm input source (motion, contact, system events...) t Duration: Alarm duration f

126APPENDIX B: EXPRESS SETUP RECORDING VALUE SELECTION RULES Case 1: Record Mode: Normal + Event Record With: Recording days The DVR wi

127Case 3: Record Mode: Normal + Event or Event Only Record With: Preset Setting DVR will apply the settings in the table below to all cameras acco

128APPENDIX C: REMOTE CONTROL The IR remote control is an accessory to enhance the convenient operation of the DVR. You can perform all the setting

129P/N: 4605XEMV12001AR_V.A EverFocus Electronics Corp. Corporate Headquarter: 12F, No.79, Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei 22101, Taiwan T

64) ETHERNET: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the LAN jack; Green LED means network is connected, amber LE

71.5 REAR PANEL During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the rear panel.

8○3 Alarm Input: Connect up to 12/8 alarm inputs, selectable between N.O./N.C. contacts. ○4 Alarm Output: N.C or N.O type alarm out (form “C”).

91.6 SYSTEM CONNECTION Please refer to the following diagrams for the system connections. Note: Monitor and Camera must be purchased separately.

101.7 REAR PANEL CONNECTOR RS232/RS485 TX RX GND 485+ 485- GND ALARM IN ALM IN1 ALM IN2 GND ALM

11 POWER IGN 12V 12V OUT GND GND CAM POWER1 12V OUT 12V OUT 12V OUT 12V OUTGND GND GND GND

EVERFOCUS ELECTRONICS CORPORATION EMV1200/800 DVR Instruction Manual  2010 EverFocus Electronics Corp www.everfocus.com All rights reserv

121.8 INSTALLATION OF EMV1200/800  The DVR can be mounted horizontally (suspend or support mounted).  Show all the possible ways to mount

13Quick Installation Guide  Unpack Everything Make sure you have everything you need before you begin the installation.  Equipment Required Th

14  Possible Installation Locations Inside the Automobile Vehicle: Truck Glove box (inside or underneath) Drive seat (between seat and wa

15 Possible Installation Locations Inside the Automobile Vehicle  Show the wiring on the wiring harness that connects to the electrica

16  Installing the Camera(s) and Monitor The DVR is typically connected to one camera installed inside the car. Other camera(s) can also be inst

17

18CCaauuttiioonnss wwhheenn uussiinngg EEMMVV11220000//880000 ppoowweerr ssoouurrccee Actual power connector for EMV1200/800 Red Cable Bla

19 Recommendation 1: To reduce vibration during movement, you can fixe it to DVR and leave a gap so that the cables will not be

201.9 VIDEO INPUTS/OUTPUTS INSTALLATION Cameras and CCTV monitors must use copper center conductor/copper braid 75 Ohm video cable (e.g. RG-59, RG-

211.11.1 Alarm Input Contacts This DVR provides one alarm input per camera. All inputs are programmable N.O. (Normal Open) or N.C. (Normal Closed) I

ii Safety Precautions  Refer all work related to the installation of this product to qualified service personnel or system installers.  Do no

221.13.1 Direct PC Connection through Crossover Network Cable The point-to-point connection of DVR and PC requires a crossover (crossed) network ca

23 Pinout of straight patch cable 1.14 FINAL INSTALL PROCESS Once you have completed the basic wiring connections, you are ready to turn on the

242 MOUSE OPERATION EMV1200/800 mobile DVRs support 2 sources to control the DVR. It can be controlled with a mouse and the handheld IR remote contr

252. Click on any icon to perform that action. These actions are covered in detail in Chapter 3. 3. Click the button to go to live view. 2.1.3

263 CONFIGURATION This chapter provides information for configuring EMV1200/800. 3.1 CONFIGURATION OF DVR EMV1200/800 can be configured through On

27 Figure 3-2 On-screen Keyboard 3.3 On Screen Configuration Menu 1. To bring up the Main Menu, right-click with the USB mouse to bring up the r

28Playback Bar Name Description Layout TheEMV1200/800 DVR has several display modes available. Click on the desired layout choice Display mode

293.4.1 Time Search Figure 3-4 Search Menu – Time Search Play From: Select the time to begin the search by choosing the Date and Time. Click on t

303.4.2 G Sensor Search Click button to start G Sensor search. Figure 3-5 Search Menu – G-Sensor Search From: Select starting date and time To:

313.4.3 GPS Speed Search Click button to enter GPS search menu. Figure 3-6 Search Menu – GPS Search From: Select starting date and time To: Sel

iii  Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards.  Water and Moisture Do not use t

32 Figure 3-7 Search Menu – GPS Bordering Search From: Select starting date and time To: Select ending date and time. GPS Border Type: Set GPS bord

333.4.4 Event Search Click button to enter Event search menu. Figure 3-8 Search Menu – Event Search From: Select starting date and time To: Sele

34 Figure 3-9 Search Menu – Event List Prev Page: Go to previous page Next Page: Go to next page Play: Playback selected item Delete: Delete selecte

353.5 ARCHIVE (USB) Right-click to bring up the Root menu, select Playback and click to enter Archive Menu. Figure 3-10 Archive Menu Camera:

363.6 Zoom 1. Make sure no camera is in playback mode 2. Select one camera 3. Right-click to bring up the Root menu, select Playback and cli

374 DVR CONFIGURATION This chapter will walk you through the DVR Menu Settings step by step and show you how to set the DVR for your specific applic

38 Figure 4-2 Configuration Menu

394.2 CAMERA SETTING Figure 4-3 is a screenshot of the CAMERA SETTING MENU. This menu is used to configure individual camera settings. Figure 4-3

40In these examples, the recording capacity of the DVR is fully allocated to normal recording, with no reserve capacity for increasing image size an

414.2.2 Video Loss Figure 4-5 Camera Settings-Video Loss Camera: Select the camera you wish to configure, “Title” will change to the title name

iv This Product is RoHS compliant. WEEE The information in this manual was current upon publication. The manufacturer

42Network Alarm: Check this box to send out a network alarm to a client PC when motion occurs. (This feature requires PowerCon software on the clien

434.2.3 Alarm Figure 4-6 Camera Settings-Alarm Speed: Maximum desired frame rate in frames per second (FPS) for event recording; if more than one

444.3 RECORD SETTING Figure 4- is a screenshot of the RECORD SETTING MENU. This menu is used to configure basic recording settings. Figure 4-7 R

454.4 ALARM/GPS Figure 4- is a screenshot of the ALARM/GPS SETTING MENU. This menu will guide you through alarm and GPS setup. Figure 4-8 Alarm/G

46Alarm: Select the alarm input trigger connection number from 1 to 12 (or 1 to 8). Enable: Check box to enable response to that alarm trigger. Inpu

474.4.2 Alarm-Event Settings This section covers notifications due to internal system event warnings. Figure 4-10 Alarm – Event Settings Event:

48Fan Failure: Figure 4-11 Alarm – Event – Fan Failure Buzzer: Check box to enable buzzer when fan is not working. Email Notify: Check box to ena

49HD Temperature: Figure 4-12 Alarm – Event - HD Temperature Buzzer: Check box to enable buzzer when hard drive’s temperature is over the “Temp.

50HD Failure: Figure 4-13 Alarm – Event - HD Failure Buzzer: Check box to enable the buzzer if no hard drive is detected on system startup. Email

51HD Full: Figure 4-14 Alarm – Event - HD Full Buzzer: Check box to enable the buzzer when hard drive is full (recommended if the Record Overwri

v TABLE OF CONTENTS 1 PRODUCT OVERVIEW... 1 1.1 F

52HD Off: Figure 4-15 Alarm – Event - HD Off Buzzer: Check box to enable buzzer if the hard drive is turned off (disconnected) or becomes disabled

53Power Loss: Figure 4-16 Alarm – Event – Power Loss Email Notify: Check box to enable email notification when power has been restored. Email ope

54Network Loss: Figure 4-17 Alarm – Event – Network Loss Buzzer: Check box to enable buzzer when network is lost. Alarm Output: This will transmit

55GPS Loss: Figure 4-18 Alarm – Event – GPS Loss Buzzer: Check box to enable buzzer when GPS is lost. Email Notify: Check box to enable email noti

564.4.3 Alarm – Video Loss Figure 4-19 Alarm – Video Loss Camera: Select the camera you wish to configure, “Title” will change to the title name

57Network Alarm: Check this box to send out a network alarm to a client PC when video loss occurs. (This feature requires PowerCon software on the c

584.4.4 Alarm-G-Sensor Settings Figure 4-20 Alarm – G-Sensor G-Sensor: Select On to enable G-Sensor function. Select Off to disable G-Sensor funct

594.4.5 Alarm-GPS Speed Figure 4-21 Alarm – GPS Speed Speed Unit: If the speed is being recorded from the GPS receiver, the desired speed displa

604.4.6 Alarm-GPS Event Action Press to enter GPS Event Action Menu. Figure 4-22 Alarm – GPS Event Action Alarm Output: This will transmit a si

614.4.7 Alarm-GPS Fencing Press to enter GPS Fencing Menu. Figure 4-23 Alarm – GPS Fencing GPS Alarm: Select “On” to enable GPS alarm. Select “

vi 4.2.1 Normal...

624.5 Date/Time Setting Figure 4-24 is a screenshot of the DATE/TIME SETTING MENU. This menu is for setting up the date/time parameters for the DVR.

63c) In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server. If selecting “GPS”, you will be able to do the follow

644.6 Display Figure 4-26 is a screenshot of the DISPLAY SETTING MENU. This menu will walk you through the Main Monitor On-Screen Display (OSD) and

65 Figure 4-27 Display-OSD Main Monitor Main Title: Check the box to display main title. Camera Title: Check the box to display camera titles for ma

664.6.3 Layout Click button to set up Layout parameters. Figure 4-28 Display-Layout Main Monitor Display Switch: Select display switch for main m

674.6.4 Sequence Click button to set up Sequence parameters. Figure 4-29 Display-Sequence Step: Sequence order. For reference. Camera: Select w

684.7 NETWORK SETTING Figure 4-30 is a screenshot of the NETWORK SETTING MENU. This menu is for configuring the DVR for a network connection. NOTE:

69Network Type: Static IP: User can set a fixed IP for network connection. DHCP: DHCP server in LAN will automatically an assign IP configuration f

702. If you are connecting through a router, make sure that you have ‘opened up’ all the required network ports in the port forwarding section of yo

714.7.2 Wireless Settings Figure 4-32 Network Menu – Wireless Wireless Mode: Select wireless mode from Static IP, DHCP or disabled. IP address: Th

vii 5.9 ROUTER OR LAN CONNECTION... 101 6 REMOTE OPERATION FROM BR

724.7.3 Mobile Connection Settings Figure 4-33 Network Menu – Mobile Connection GPRS Service: Select “On” to enable GPRS service. Select “Off” t

734.7.4 Email Settings Figure 4-34 Network Menu – Email Settings SMTP Server: Assign the SMTP (e-mail) server’s name. NOTE: For more reliable e

744.7.5 DDNS Settings DDNS Server: Select either “EverfocusDDNS” or “www.dyndns.org” as the DDNS provider. If DDNS will not be used, simply select

75www.dyndns.org Figure 4-36 Network Menu – DDNS- www.dyndns.org Host name: Host name created through the dyndns account. User name: User name o

764.7.6 Alarm Server Settings Figure 4-37 Network Menu – Alarm Server This menu defines the parameters for communicating with a PC. Server IP1~

774.7.7 Meta Server Settings Figure 4-38 Network Menu – Meta Server Meta Server is the server to send out GPS Data or G-Sensor Data to Central M

784.7.8 Network Test Figure 4-39 Network Menu – Network Test Test Server Address: Enter the server address to be tested. Click button to start

794.7.9 Remote/Mobile Figure 4-40 Network Menu – Remote/Mobile Check the box H.264: For MobileFocus* software (iPhone/ Android edition). Chec

804.8 SYSTEM 4-39 is a screenshot of the SYSTEM MENU. This menu is for setting up the general system parameters for the DVR. Figure 4-41 System

81Add Click “Add” button to add a new user. Set the name (case-sensitive), password, access level and status. Press “Add” button to confirm a new us

11 PRODUCT OVERVIEW Full featured video surveillance on the move: the EverFocus EMV1200 / 800 digital video recorder, with H.264 compression technol

82There are three system access levels. The following charts show the rights of each level. Local Local Admin User Guest Live View O O O Copy O

834.8.2 I/O Control Figure 4-43 is a screenshot of the I/O Control Setting Menu. This menu is used to define the settings for controlling the DVR t

84RS485 Figure 4-44 System-I/O Control-RS452 Baud Rate: The speed used to transmit instructions or information through the RS485 port on the DVR. C

854.8.3 DISK Figure 4-45 is a screenshot of the DISK MENU. This menu is used to review the DVR’s hard drive settings and status. No values in this s

864.8.4 LOG Figure 4-46 System-Log This screen is used to choose, display and/or export log entries. From Date: Select starting date of log to be

87View Log: Press button to view the log. See Figure 4-46 for more detail. Clear Log: Press button to clear the log. Export Log to USB: Press

884.8.5 SETTINGS Figure 4-48 System-Settings Audio Output Channel: Select audio output channel. Language: Choose which language the DVR uses. The

894.8.6 SERVICE Figure 4-49 System-Service. Firmware Current Firmware Version: Displays the current version. Upgrade from USB: Press “Upgrade” to

904.9 INFORMATION Figure 4.50 is a screenshot of the INFORMATION MENU. This menu displays important (read only) system information. Figure 4-50 In

915 Networking Overview This chapter will give you a basic instruction on how to set up the DVR for network connection. It is highly recommended th