EverFocus ECOR264-D2 DVR Series Manual de usuario

User Manual EECCOORR226644--DD22 DDVVRR SSeerriieess

2-Express Setup: A unique menu option for quick & easy installation and setup -Express Archive: Archive video instantly (to USB) while playing b

925 Networking Overview This chapter will give you a basic instruction on how to set up the DVR for network connection. It is highly recommended th

935.4 Virtual Ports A port number represents a "channel" or entryway for network communications. Port numbers allow different computers

94 The modem/router was either installed by your Internet service provider or purchased by you to establish a connection to the Internet. A router a

952. Direct High Speed Modem Connection: A direct modem connection uses a standard network cable to connect the modem directly to a computer (or in

96Connection Procedure:  The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have never made a cross-ove

97

98

99  Click on the option that says “Use the following IP address”  Assign an IP address of 192.168.1.2, a Subnet Mask of 255.255.255.0, and a

1005.8 Direct High Speed Modem Connection Straight Through Ethernet Cable Pin outs: The Figure below shows the pin configurations for a straigh

101 Log into the EverFocus DVR menu and go to the Network Setting Menu.  Input the Static IP address, the Subnet Mask, and the Gateway that yo

31.3 SPECIFICATIONS ECOR264-4/8D2 Channel Number 4 8 Compression Format H.264 Recording Rate/Resolution *Total = 240 FPS @ CIF; per camera reso

1025.9 Router or LAN Connection Straight Through Ethernet Cable Pin outs: The Figure below shows the pin configurations for a straight cable.

103  Once you have a straight through cable plug one end into the LAN port on the back of the recorder and the other into the router.  Log into

104number of the IP address. For example, if the IP address of the computer is 192.168.2.101, the DVR’s IP address should be 192.168.002.050.  T

1056 REMOTE OPERATION FROM BROWSER 6.1 CONNECTING TO ECOR264 D2 To access the DVR from a computer, open an Internet Explorer window and in the addre

106 Enter a user name and password to access the recorder. These can be changed in the System section of the Main Menu.  The default user name

107Install the ePlusDVR.cab file when prompted to do so. Once the file finishes installing, you will return to the screen like the one below.

108 Right click on the yellow bar and select “Run Add-on…” Install the MSXML file when prompted to do so. Now, you will able to see the remote

1096.2.2 Enabling ActiveX Controls Note: This section is only necessary if you DO NOT see the yellow ActiveX bar at the top of your browser screen w

110 In the Security Settings window, scroll to “ActiveX controls and plug-ins” Set the controls as follows: “Enable”:  Allow previously unused

111Close the window so you are back at the login screen. Click the Refresh button to reload the page. Install the ePlusDVR.cab file when prompt

41.4 FRONT PANEL Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding buttons on the include

1126.3 REMOTE LIVE VIEW 1. Click on a camera number on the left side of the display to switch that camera to full screen. Click on “4UP” to disp

113 Schedule Setup Network Setup Hard Disk Setup Display Setup System Setup Information Setup Video Export Playback Search PTZ Control 5

1146.4 REMOTE PLAYBACK To playback the video, click the “Search” button. Select from “Time Search”, “Event Search”, or “Motion Search”. For more d

1157 EVERFOCUS DDNS SETUP Setup Steps: Step 1. Set up the Network Menu according to the instructions detailed in the Networking chapter. (Make s

116settings and DDNS name and resubmit the DDNS name until you get “Success”. Step 5. You should now be able to connect by typing the name you cr

1178 LINKSYS & D-LINK PORT FORWARDING 8.2 TYPICAL LINKSYS PORT FORWARDING This section will cover a few simple configurations for the Linksys

118 Applications and Gaming allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specia

1198.3 TYPICAL D-LINK PORT FORWARDING This section will cover a few simple configurations for the D-Link router. This chapter is only to offer som

120Click Virtual Servers on the left to bring up the following screen. Virtual Servers allows users who are connecting remotely to access service

121Here is an example of the information for each service: Name Private IP Protocol Private Port Public Port Schedule HTTP 192.168.1.50 Both 80 8

5○1 Press channel key (CH1~CH8) / (CH1~CH4) to display that channel in full screen view. ○2 Press channel key again for 2x electronic zoom. Zoom sc

1229 TROUBLESHOOTING If you have problems with the system, run through the following checklist to see if you can solve the problem.  The DVR w

123 Make sure you are using the correct WAN IP address given by the ISP, or, if you have a Dynamic IP, check if the IP address has changed; use DD

124APPENDIX A: TIMING OF ALARM MODES Transparent Mode Input EventAlarm Durationtt Event = t Reaction t Event: Duration of alarm input source (mo

125Timeout Mode tInput EventAlarm Durationt Duration = t Reactiont Event t Event: Duration of alarm input source (motion, contact, system events

126Timeout Mode: Retrigger of Alarms t Event: Duration of alarm input source (motion, contact, system events...) t Duration: Alarm duration f

127APPENDIX B: EXPRESS SETUP RECORDING VALUE SELECTION RULES Case 1: Record Mode: Normal + Event Record With: Recording days The DVR wi

128Case 3: Record Mode: Normal + Event or Event Only Record With: Preset Setting DVR will apply the settings in the table below to all cameras acco

129APPENDIX C: REMOTE CONTROL The IR remote control is an accessory to enhance the convenient operation of the DVR. You can perform all the setting

130P/N: 4605XECR04001AR_Ver.B Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26

61.5 REAR PANEL During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the rear panel.

7 ○10 RS485 socket: For remote control via RS-485 keyboards and telemetry control for attached PTZ devices ○11 Audio Out: Connect to the line le

81.6 VIDEO INPUTS/OUTPUTS INSTALLATION Cameras and CCTV monitors must use copper center conductor/copper braid 75 Ohm video cable (e.g. RG-59, RG-6

9 Alarm input with N.O. (Normal Open) contact Alarm input with N.C. (Normal Closed) contact in idle state in idle state All set

10 RS-485 bus serial wiring with connector boxes and connection cable Direct RS-485 bus star wiring is not supported unless using an EverFocus Mode

11ATTENTION: EDA997A signal distributors are unidirectional! This means that the signal only flows from the input towards the outputs. Therefore, e

EVERFOCUS ELECTRONICS CORPORATION ECOR264-D2 DVR Series Instruction Manual  2010 EverFocus Electronics Corp www.everfocus.com All rights r

121.10 USB-Mouse installation Connect the USB mouse to one of the 2 USB ports. (This can be done while DVR is powered on) The rear USB V1.0 port is

131.11.2 Network Connection through Patch Cable The connection to an existing network requires a normal patch cable (straight-through). The illustr

142 MOUSE AND FRONT PANEL OPERATION ECOR264 D2 DVRs support multiple sources to control the DVR. It can be controlled with a mouse, the front panel,

152.1.3 Operation in the Configuration Menus Click on the icon to access the Configuration Menu. The Configuration menu screens (shown in Figure

16 Button: Click the button to execute the function. Bar: Click and hold on the bar to adjust the set point Left or Right. * Note about on-screen

172.2 General Front Panel Operation 2.2.1 How to select a channel / Enable audio 1. In a view consisting of more than one channel, press the arrow

18 Figure 2-3 OSD Menu 1. In section 1, there are ten setup options available. Use arrow keys to highlight an icon and press “Enter” to select it.

19 Bar: Press “Enter” key to activate the slider, then use arrow keys to adjust the setting. Press “Enter” again to finalize the changes. * Note ab

203. GENERAL DVR OPERATIONS This chapter introduces the operations on major functions including playback, layout change, sequence, triplex operation

21+ To input password by mouse: click the password field to bring up the on-screen keyboard (see Figure 3-2 On-screen Keyboard). Click on each butto

ii Safety Precautions  Refer all work related to the installation of this product to qualified service personnel or system installers.  Do no

223.5 PLAYBACK The playback bar is the fastest way to show video from the exact time which users want to see. The playback bar allows a user to see

23L4: Entire time bar is 10 minutes. L5: Entire time bar is 1 minute. 11. Express copy: Press to start express copy when camera during playback (onl

2410. Pattern Operation (Pattern is the “0” Tour in Everfocus and Pelco PTZ cameras) a. Click “Pattern” button 11. Steps to run a tour a. Click “T

25 Figure 3-3 Express Control PTZ The screen is divided into a 4x4 grid. The function of each section is defined as below:  1: PTZ pan/tilt left

263.7 LAYOUT The ECOR264 D2 DVR has several display modes available, depending on the number of cameras the DVR supports. The different available l

273.9 DISPLAY Press the Display button on the menu by using the mouse or selecting this icon with the front panel keys and pressing ‘Enter’. Pr

28 4. When in ZOOM mode, the mouse cursor will change to a different icon in different areas of the screen. Or, use the arrow keys to bring a diffe

293.12 SEARCH By mouse: Right-click to bring up the menu bar and click to enter Search Menu. By front panel: Press ”Search” key to enter Search M

303.12.2 Event Search Figure 3-6 Search Menu – Event Search From: Select starting date and time To: Select ending date and time. Camera: Select w

31Prev Page: Go to previous page Next Page: Go to next page Play: Playback selected item Copy: Copy selected item 3.12.3 Smart Search Smart Search

iii Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol cleaners. Use a damp cloth for cleaning  Atta

32Camera: Select which cameras to review. Grid Setting: Press Grid Setting button to open the motion grid setup window. Edit Motion Grid: Press thi

33 Click on the “Search” button to start searching. The search results will be shown as a list of events. Prev Page: Go to previous page Next Page

343.12.4 Snapshot Search Snapshot Search shows snapshots of the specified interval, it helps users to quickly find the interested scene. Figure 3-8

353.13 COPY To bring up Copy menu: By mouse: Right-click to bring up the menu bar and click on to enter Copy Menu. By front panel: Press the “Cop

363.14 LOGOUT Right-click to bring up the menu bar and click the button to bring up the Logout Confirmation window (see Figure 3-11). Figure 3

374 DVR CONFIGURATION This chapter will walk you through the DVR Menu Settings step by step and show you how to set the DVR for your specific appli

38Date: Sets the current date of DVR. Time: Sets the current time of DVR. Record Mode: Choose from Normal+Event: Normal recording plus event recor

39Network Type: Static IP: User sets a static IP for network connection. DHCP: DHCP server in LAN will automatically assign IP for network connectio

404.3 CAMERA SETTING Figure 4-2 is a screenshot of the CAMERA SETTING MENU. This menu is used to configure individual camera settings. Figure 4-2

41Covert: Check the box to hide the camera picture in live and sequence modes. However, the image will still be recorded and can be played back by a

iv This Product is RoHS compliant. WEEE The information in this manual was current upon publication. The manufacturer

42Recording capacity remaining for all cameras (shown to the right of the Normal Speed field): The number here indicates the remaining unallocated r

434.3.2 Video Adjust Figure 4-3 Camera Menu – Video Adjust Camera: Select the camera you wish to adjust. “Title” will change to the name of the

444.3.3 Motion Figure 4-4 Camera Menu – Motion Camera: Select the camera you wish to configure. “Title” will change to the title name of the sel

45Timeout: Alarm output lasts for a set of time duration. If this option is selected, a field will appear for setting the duration. Permanent: Alarm

46 Figure 4-5 Camera Menu – Motion Grid Setting Apply To: This button can be used to copy the motion settings to other cameras. Select which came

474.3.4 Video Loss Figure 4-6 Camera Menu – Video Loss Camera: Select the camera you wish to configure, “Title” will change to the title name of

48Trans+Timeout: Alarm output continues until the event ends, then continues for a set time duration. Apply To: This button can be used to copy the

49Schedule Record: Use schedule recording mode. For Schedule recording, the only way to stop the DVR from recording is to turn schedule recording o

50Alarm: Enter the expected number of hours per day due to alarm recording. If the total of Motion and Alarm hours is more than 24 hours, the calcul

514.5 ALARM & EVENT SETTING Figure 4-10 is a screenshot of the ALARM & EVENT SETTING MENU. This menu will guide you through alarm and event

v TABLE OF CONTENTS 1 PRODUCT OVERVIEW ... 1 1.1

52N.O.: Normal Open contact. N.C.: Normal Closed contact. Network Alarm: Check this box to send out a network alarm to a client PC when motion occur

534.5.2 Event This section covers notifications due to internal system event warnings. Figure 4-11 Alarm & Event Menu – Event Event: Selec

54HD Temperature: Figure 4-12 Alarm & Event Menu – Event - HD Temperature Log: Check box to record HDD temperature events in the log. Buzzer:

55HD Failure: Figure 4-13 Alarm & Event Menu – Event - HD Failure Log: Check box to record events in the log. Buzzer: Check box to enable the

56HD Full: Figure 4-14 Alarm & Event Menu – Event - HD Full Log: Check box to record events in the log. Buzzer: Check box to enable the buzz

57HD Off: Figure 4-15 Alarm & Event Menu – Event - HD Off Buzzer: Check box to enable buzzer if the hard drive is turned off (disconnected) or

58Power Loss: Figure 4-16 Alarm & Event Menu – Event – Power Loss Log: Log is permanently checked for this feature. Power Loss events are alwa

59Network Loss: Figure 4-17 Alarm & Event Menu – Event – Network Loss Log: Check box to record events in the log. Buzzer: Check box to enable

604.6 SCHEDULE SETTING Figure 4-18 is a screenshot of the SCHEDULE SETTING MENU. In this menu you can set a unique configuration to enable recordin

61Event Frame Rate: FPS recording rate for events. Selectable frame rate includes 30fps, 15fps, 10fps, 7.5fps, 5fps, 1fps or 0fps. (0fps means no ev

vi 3.6 PTZ... 23 3.6.1

62One time: This entry is used only once, on that specific date. Month/date: Uses this entry on the same month and day, every year (e.g. January 1 f

63To Set Schedule using Mouse 1. Click on desired start time block (no numbers on it) on a time bar. At this time, the selected time block will be

64 3. Selecting camera: Use Right/Left arrow keys to select desired camera to configure. Selected camera number will be highlighted by a blue frame

65 7. Changing recording mode (color) of a timezone: Use Right/Left arrow key to switch to the first block (with number on it) of a timezone. Click

66Record: Displays Record mode Resolution: Select recording resolution. NTSC: 704x480 / 704x240 / 352x240 PAL: 704x576 / 704x288 / 352x288 Normal: F

67to 15 FPS and also increase the resolution and rate of the five 2 CIF cameras to 4 CIF and 15 FPS, with 15 CIF equivalent FPS still available to b

684.6.4 Alarm Action Figure 4-22 Schedule Menu-Alarm Action Defines recording response to “alarm” input trigger signals by time of day on specifi

694. Change the section to different mode (with a different color) by clicking on the first block of the section. The color switches from gray ->

70 6. Editing blocks in a time bar: when a time bar is chosen (highlighted in red frame), the press Enter button to select that time bar for config

71 Apply to Cameras: This button can be used to copy schedules to other cameras. Select which cameras you wish to copy to. "Select All" se

vii 4.10.2 Daylight Saving...

724.7 NETWORK SETTING Figure 4-23 is a screenshot of the NETWORK SETTING MENU. This menu is for configuring the DVR for a network connection. NOTE:

73DNS Server 2: This field shows the secondary DNS server for your network. HTTP Port: Port number for HTTP/WEB communication. Additional informatio

74• Well Known Ports 0 thru 1023 • Registered Ports 1024 thru 49151 • Dynamic and/or Private Ports 49152 thru 65535 So, rather than encounter a

75Authentication: Check this box if the SMTP server requires authentication (user name / password). SSL: Check the box if mail server needs communi

76The DDNS name you choose must be unique; that is, it must not already be in use. Please go to the website http://everfocusddns.com and check that

77Confirm: Re-enter password. Note: For more details on DDNS setup, please see “Chapter 7 - Everfocus DDNS Setup”. 4.7.4 Alarm Server Figure 4-2

784.8 DISK INFORMATION 4-28 is a screenshot of the DISK INFORMATION MENU. This menu is used to review the DVR’s hard drive settings and status. No

794.9 DISPLAY SETTING Figure 4-29 is a screenshot of the DISPLAY SETTING MENU. This menu will walk you through the Main Monitor On-Screen Display (

804.9.2 Main M/T SEQ Figure 4-30 Display Menu – Main M/T SEQ Step: Sequence order. For reference. Camera: Select which camera appears in the curr

814.10 SYSTEM SETTING Figure 4-31 is a screenshot of the SYSTEM SETTING MENU. This menu is for setting up the general system parameters for the DVR

11 PRODUCT OVERVIEW The introduction of the ECOR264 D2 series adds the advantages of H.264 compression to the power and flexibility of the already p

824.10.2 Daylight Saving Figure 4-32 System Menu – Daylight Saving Daylight Saving: Check the box to enable automatic daylight saving time adju

834.10.3 User User Menu is where you can add or delete different login IDs on the system as well as set access levels. See the charts below for a l

84Edit Click “Edit” button to make changes to an existing user account. Press “Save” button to save changes or “Cancel” to exit without making chang

85There are three system access levels. The following charts show the rights of each level. Main Menu at the DVR User Level and Right RIGHT ADMINI

864.10.4 I/O Control Figure 4-36 is a screenshot of the I/O Control Setting Menu. This menu is used to define the settings for controlling the DVR

87Baud Rate: The speed used to transmit instructions or information through the RS485 port on the DVR. Choose from the following speeds: 1200, 2400,

88unit during the upgrade; this can cause the system to fail to recover, requiring factory service to repair. Configurations Load Factory Default:

894.11 INFORMATION Figure 4-38 is a screenshot of the INFORMATION MENU. This menu displays important (read only) system information. Figure 4-38

904.11.2 Log Figure 4-39 Information Menu – Log This screen is used to choose, display and/or export log entries. From Date: Select starting date

91Export Log to USB: Press “Export’ button to export log data to USB. Figure 4-40 Log List Prev Page: Go to the previous page of log. Next Page