EverFocus ECOR 264-8/4 D2 Manual de usuario descargar pdf (Pagina 87)

Firmware Upgrade: Press “Upgrade” to upgrade the firmware.

NOTE: To perform a Firmware Upgrade, you will need to connect a USB flash device with

the desired firmware. Do not disconnect the USB device or turn off the power to the

unit during the upgrade; this can cause the system to fail to recover, requiring factory

service to repair.

Configurations

Load Factory Default: Click “Load” to restore all menu settings to the default values. User Account,

Network IP Settings, and Time are not affected. 3GP streaming is disabled by default.

Load From USB: Click “Load” to upload saved DVR configuration settings from a USB flash device.

Save To USB: Click “’Save” to save the current DVR configuration settings to a USB flash device.

Language: Choose which language the DVR uses. The available languages may vary based on region.

4.11 INFORMATION

Figure 4-38 is a screenshot of the INFORMATION MENU. This menu displays important (read only) system

information.

Figure 4-38 Information Menu – System

4.11.1 System

System

Version: Displays firmware version number.

Model: Displays DVR model number.

NTSC/PAL: Displays current video format selected based video format on Camera 1 input at boot up.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 123 124

Sin comentarios

EverFocus ECOR 264-8/4 D2 Manual de usuario Pagina 87