EverFocus ECOR 264-8/4 D2 Manual de usuario descargar pdf (Pagina 76)

4.7.4 Alarm Server

Figure 4-27 Network Menu – Alarm Server

This menu defines the parameters for communicating with a PC running PowerCon software.

Server IP1~3: IP address of client PC with installed PowerCon Software. The network alarm can be

transmitted to up to 3 addresses.

Protocol: Select the protocol type for alarm transmission:

UDP: User Datagram Protocol

TCP: Transmission Control Protocol

Note: Please use UDP for LAN applications only as this mode is not secure for

internet connections.

Port: Select the transmission port for network alarm messages

Network ID: The network ID is an identifier for the alarm transmitter (DVR sending the alarm).

Notes:

1. The network ID must consist of 10 digits

2. This is a numeric field; characters are not allowed.

3. Please do not use any left-hand zeros.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 123 124

Sin comentarios

EverFocus ECOR 264-8/4 D2 Manual de usuario Pagina 76