EverFocus ECOR 264-8/4 D2 Manual de usuario descargar pdf (Pagina 13)

1.5 REAR PANEL

During initial setup you will be connecting your DVR to multiple input and output devices. This is done

through the rear panel.

Figure 1-2 Rear Panel

1 Video in Connect camera’s video output or other composite video source to the video input

connection.

2 Alarm Out N.C. or N.O. type alarm out (form “C”).

3 Alarm In Connect up to 4/8 alarm inputs, selectable between N.O./N.C. contacts.

4 POWER Plug the DC 12V power source provided into the power socket.

5 RS485 For remote control via RS-485 keyboards and telemetry control for attached PTZ

devices

6 BNC Main monitor composite BNC output for main monitor (live/playback/setup).

7 VGA Connect a VGA monitor to the VGA output connection. VGA resolution is 1280x1024.

8 RS232 9-pin D-Sub control input for RS-232.

9 USB 2.0 USB port recommended for connecting the USB mouse.

10 LAN RJ-45 network connection 10/100 Mbps Ethernet. There are two LEDs on the LAN jack;

Green LED means network is connected, amber LED flickers when data is being

exchanged.

4 5 6 7 8 9 10

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 123 124

Sin comentarios

EverFocus ECOR 264-8/4 D2 Manual de usuario Pagina 13