EverFocus Flex1.0 Manual de usuario descargar pdf (Pagina 38)

Y indicates there is alarm output (relay energized)

N indicates there is no alarm output (relay not energized).

R refers specifically to alarm output relay on the door module,

indicating that alarm output will be generated only if the event occurs

on the corresponding door.

c. For the alarm module outputs with no menu option, follow the steps as

below:

Double click the mouse to switch the setting from:

Yes to No or vice versa. Yes indicates there is an alarm output (relay

energized). No indicates there is no alarm output (relay not energized).

Fig. 4.20 Configure an alarm

Miscellaneous Configurations

There are three more alarm configurations in the controller configuration window,

including: fire alarm control, set system time and set ARM delay time. The controller

configuration window is located under “Management” Æ “Controller Configuration”

Æ “Other setting” tab.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 122 123

Sin comentarios

EverFocus Flex1.0 Manual de usuario Pagina 38