
2. Click the controller address to select the controller.
3. Click on the particular door to select the door to open. For example in the following
figure, door 1 in controller 1 is selected.
Fig. 12.7 Select a door in the resource list
At this point, under “Doors”, the controller address shows the corresponding
selected controller address. For example:
Door name “Front door:” is selected as in the picture bellow.
Controller at address 0001 is selected as in the picture bellow.
Door 1 is selected as in the picture bellow.
Fig. 12.8 Door remote control
4. Click on the arrow and select from the menu the length of time the door must open.
The options in the menu are 1-59.
108
Comentarios a estos manuales