EverFocus EDVR 16D1 Manual de instrucciones descargar pdf (Pagina 62)

5252

2. ALARM OUTPUT

This will transmit a signal to another device. The setting of alarms are NONE = not

activated, 1 = output signal 1 transmits, 2 = output signal 2 transmits, 3 = output

signal 3 transmits and 4 = output signal 4 transmits. To change this, simply use the

Jog Dial on the DVR.

(Only EDVR16D3 model has 4 alarm outputs. All others have only 1 alarm output).

3. ALARM DURATION

Permanent. This setting cannot be changed.

4. NETWORK ALARM

YES: To enable network alarm.

NO: To disable network alarm.

5. SEND EMAIL

YES: Send an email when HDD’s temperature is overheated.

NO: Will not send an email when HDD’s temperature is overheated.

The email settings can be set in the NETWORK SETUP MENU.

6. STOP RECORD

YES: Stop recording when HDD’s temperature is overheated.

NO: Will not stop recording even when HDD’s temperature is overheated.

7. SET TEMPERATURE:

When HDD’s temperature is higher than the temperature set here, all other active

settings in HDD TEMP will take effect (BUZZER, ALARM OUTPUT, ALARM

DURATION, NETWORK ALARM, SEND EMAIL, STOP RECORD). The default value is

60°C (140°F).

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 154 155

Sin comentarios

EverFocus EDVR 16D1 Manual de instrucciones Pagina 62