EverFocus EDVR 16D1 Manual de instrucciones descargar pdf (Pagina 105)

9595

Application - In this field, enter the name you wish to give the application. Each

name can be up to 12 characters.

Start/End - This is the port range. Enter the number that starts the port range under

Start and the number that ends the range under End.

Protocol - Enter the protocol used for this application, either TCP, UDP, or Both.

IP Address - For each application, enter the IP Address of the PC (in this case the

DVR) running the specific application.

Enable - Click the Enable checkbox to enable port forwarding for the relevant

application.

Change these settings as described here and click the Save Settings button to

apply your changes or Cancel Changes to cancel your changes.

Example:

DVR 80 to 80 Both 192.168.1.50 Enable

DVR 1600 to 1600 Both 192.168.1.50 Enable

DVR 37260 to 37263 Both 192.168.1.50 Enable

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 154 155

Sin comentarios

EverFocus EDVR 16D1 Manual de instrucciones Pagina 105