EverFocus EDN Plus Series Manual de usuario descargar pdf (Pagina 25)

EDN Series Mini Indoor IP Dome

6.2.2 Testing the Playback Function

1. To test the Playback function (this is not required), set up a “Manual Trigger” Recording Event by

clicking Event Settings > Event.

2. Give the event a name, like “Test 1”.

3. In the “Event Triggered Type” field, click on Manual Trigger.

4. Below this, check “Enable This Event”, “Enable Post-trigger Buffer”, and “Record to SD Card”.

5. To save your settings, click the Create button, and the Event will be listed in the Event List.

6. Look at the “Post-trigger Buffer” at the bottom to make sure the buffer time is set to 10 seconds.

Click the Apply button.

7. Click the LiveView button to go back to the Live View page.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

Sin comentarios

EverFocus EDN Plus Series Manual de usuario Pagina 25