EverFocus ED Series Especificaciones

EVERFOCUS 1/3” Color Rugged Dome Camera Operation Instructions Model No. EHD300N Please read this manual first for correct installation and op

9SPECIFICATIONS Pickup Device 1/3'' SONY Super HAD CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec. PAL:

10 CONTENT LIST Standard Accessories 1. Camera Unit 2. Operation Instruction (this document) 3. Accessory Pack 4. Waterproof Connector 5. Power

11EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 ww

16. Cleaning Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera body. Use lens tissue or a cott

2INSTALLATION 1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1). Please pay attention not to damage the lens.

33. Mounting the base. Attach the base to the wall or ceiling, fix the base by the 4 setscrews attached in the accessory pack. Please make s

4 Caution: To prevent moisture leaking into the housing, apply an appropriate gasket or sealant around the conduit connection. 4. Wire Connec

5 Connect the power supply cable (12VDC/24VAC), video output and alarm output to the proper connectors shown as Figure 5. The V. Phase adju

6 Figure 6 Lens fixing Screws 140° 360° 60°

7DIP SWITCH FUNCTION ¾ BLC (Back Light Compensation) When BLC is turned on, the AGC, FL and IRIS operating point is determined by averaging over the

8SIMPLE INSTRUCTIONS FOR THE DESICCANT PACK Due to the camera lens blurred from the humidity inside the camera. The desiccant pack absorbs the humid