EverFocus EPHD08 Manual de usuario descargar pdf (Pagina 65)

HD Temperature:

Figure 4-13 Alarm & Event Menu – Event - HD Temperature

Log: Check box to record HDD temperature events in the log.

Buzzer: Check box to enable buzzer when hard drive’s temperature is over the “Temp. Warning Limit”.

Email Notify: Check box to enable email notification when HDD temperature is over the “Temp. Warning

Limit”. Email operation requires that valid email settings have been entered in the Network Setting/Email

setup screen.

Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and

setting up Alarm Server in Network Setup menu)

Stop Recording: Check box to stop recording when HD’s temperature is over the “Temp. Warning Limit”.

Temp. Warning Limit: Sets the trigger temperature for HD Temperature event actions. Choose between

50C /122F or 70C /158F.

Alarm Output: This will transmit a signal through the alarm output. It can be set to either “NONE” (not

active), “1” or “2” (active).

Output Type: Output action will be Transparent and cannot be changed (alarm output remains as long as

the alarm condition is active).

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 141 142

Sin comentarios

EverFocus EPHD08 Manual de usuario Pagina 65