EverFocus EPHD08 Manual de usuario descargar pdf (Pagina 61)

4.5 ALARM & EVENT SETTING

Figure 4-4 is a screenshot of the ALARM & EVENT SETTING MENU. This menu will guide you through

alarm and event setup.

Figure 4-4 Alarm & Event Menu - Alarm

4.5.1 Alarm

Alarm: Select the alarm input trigger connection number from 1 to 8 (one trigger per camera input).

Enable: Check box to enable response to that alarm trigger.

Log: Check box to record these alarm events in the log.

Pre-alarm Record: Check box to start copying recorded video to the hard disk from 5 seconds before the

alarm event. (Pre-alarm recording rate will follow the “Normal” frame rate setting)

Buzzer: Check this box to enable the buzzer when an alarm occurs.

HD Monitor: HD monitor display options when an alarm occurs.

No change:

No change on the main monitor display.

Full screen: A full screen of the active camera will display on the HD monitor.

Record: Select which camera(s) will start recording in response to this alarm event.

Email Notify: Check box to enable email notification when an alarm occurs. Email operation requires that

valid email settings have been entered in the Network Setting/Email setup screen. (See Section 4.6.2 Email

for more information.)

Input Type: This field is to change the type of alarm trigger.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 141 142

Sin comentarios

EverFocus EPHD08 Manual de usuario Pagina 61