EverFocus EMV200 DVR Manual de usuario descargar pdf (Pagina 74)

5.8 Direct High Speed Modem Connection

Straight Through Ethernet Cable Pin outs:

The Figure below shows the pin configurations for a straight cable.

Connection Procedure:

 The first step is to purchase or make a straight through cable. We recommend purchasing one if you have

never made a straight through cable. Please remember you can not use a cross-over network cable for

this application

 Once you have a straight through cable plug one end into the LAN port on the back of the recorder and

the other into the high speed modem.

 Log into the EverFocus DVR menu and go to the Network Setting Menu.

 Input the Static IP address, the Subnet Mask, and the Gateway that you obtained from the internet

service provider.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 101 102

Sin comentarios

EverFocus EMV200 DVR Manual de usuario Pagina 74