EverFocus EMV200 DVR Manual de usuario descargar pdf (Pagina 38)

Email Notify: Check box to enable email notification when SD card is full. Email operation requires that valid

email settings have been entered in the Network Setting/Email setup screen.

Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and setting up

Alarm Server in Network Setup menu)

Alarm Output: This will transmit a signal through the alarm output. It can be set to either “NONE” (not active) or

“1” (active).

Output Type:

Timeout: Alarm output lasts for the set time duration.

Permanent: Alarm will be continuously active until user presses the “Enter” key or resets the alarm remotely.

Transparent: Alarm output remains active until event ends.

Trans+Timeout: Alarm output continues until event ends, then continues for the set time duration.

Timeout Duration: Time duration selectable from 1 to 150 seconds.

Click button to return to the previous level of menu.

SD Card Missing:

Figure 4-12 Alarm – Event – SD Card Missing

Email Notify: Check box to enable email notification when SD card is missing. Email operation requires that valid

email settings have been entered in the Network Setting/Email setup screen.

Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and setting up

Alarm Server in Network Setup menu)

Alarm Output: This will transmit a signal through the alarm output. It can be set to either “NONE” (not active) or

“1” (active).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 101 102

Sin comentarios

EverFocus EMV200 DVR Manual de usuario Pagina 38