EverFocus ECOR264-D2 guide Manual de usuario descargar pdf (Pagina 20)

1.10 USB-Mouse installation

Connect the USB mouse to one of the 2 USB ports. (This can be done while DVR is powered on) The rear

USB V1.0 port is recommended to reserve the higher speed front USB V2.0 port for video copy/export.

NOTE: Recommended mouse types are Logitech® and Microsoft® wired USB wheel-mouse. Wireless

USB mouse is not supported.

1.11 NETWORK CONNECTION

This section only describes physical connection to an Ethernet network. This step must be completed

before the DVR can connect to the network. There are two basic types of connection:

1.11.1 Direct PC Connection through Crossover Network Cable

The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of

connection is ONLY used for direct connection to a single PC. Make sure that the PC is equipped with a

10/100 Mbps compatible network connection.

Figure 1-3 Direct PC Connection

Pinout of crossover-cable

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 139 140

Sin comentarios

EverFocus ECOR264-D2 guide Manual de usuario Pagina 20