EverFocus EPN Plus Series Guía de instalación descargar pdf (Pagina 7)

EPN Plus Series

Ceiling Mount

It is required to use the optional Indoor Recessed Mount Bracket and Surface Ring to attach the camera to

the ceiling.

1. Cut a hole on the ceiling using the supplied template.

2. Slightly turn the surface ring and remove it from the bracket.

3. Place and then screw the camera’s top housing on the top disk of the bracket using the 3 short screws.

Top Disk

4. Use a cable or other mechanism to hang the bracket on the ceiling. Screw the 3 rotation clips of the

bracket on the ceiling using a screwdriver.

5. Put on the supplied gloves and then push the main body upward to the top housing. See Step 7 in Wall

Mount.

6. Screw the housing cover to the top housing slowly by twisting it clockwise.

7. Slide the surface ring to the fillister on the bracket.

Note: When you turn on the power, the camera will enter self-inspection mode and run a self-testing

program. Once this is complete, you will be able to operate it via any IP network.

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

EverFocus EPN Plus Series Guía de instalación Pagina 7