EverFocus EHD150 Especificaciones

EVERFOCUS 1/3” B/W Rugged Dome Camera Operation Instructions Model No. EHD150 Please read this manual first for correct installation and opera

9SPECIFICATIONS Pickup Device 1/3” SONY interline transfer CCD Picture Element NTSC :768(H) × 494(V) PAL: 752(H)×582(V) Horizontal Resolution

10 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380

16. Cleaning Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera body. Use lens tissue or a cott

2 INSTALLATION 1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1). Carefully uncap the housing cover as the dire

33. Mounting the base. Attach the base to the wall or ceiling, fix the base by the 4 setscrews attached in the accessory pack. The dome is

4or sealant around the conduit connection. 4. Re-assemble Camera 1. If mounting COLOR RUGGED DOME CAMERA on the wall, please to aim the “Wall” in l

5 5. Wire Connection Connect the power supply cable (AC24V/DC12V), video output and alarm output to the proper connectors shown as Figu

66. View Angel Adjustment The camera can be rotated 360∘horizontally, 140° vertical and 60° 3’rd axis view angles (as shown in Figure 8). Adjust t

7DIP SWITCH FUNCTION LL (Line-Lock) Off/On To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on). Set the line-

8BLC (Back Light Compensation) On/Off When BLC is turned on, the AGC, ES and IRIS operating point is determined by averaging over the center area ins