EverFocus EPTZ3150 Manual de usuario descargar pdf (Pagina 51)

In zone menu, you can set a zone and name it, when the speed dome turns to the zone

you set, it will display zone name on the screen (only if “OSD/AREAS->Display -> Zone” is

set as “YES”). Tilt the joystick up and down to scroll through the characters, then tilt left or

right to move to the previous/next position. When finished, tilt the joystick right to go to

"Range" section, and press Enter key to enter Range sub-menu. Use the joystick to move

speed dome to its left position. Press IRIS+ key to save left position setting and go to next

step or press IRIS- to cancel.

(diagram 3.10)

Use the joystick to move speed dome to its right position. Press IRIS+ or IRIS- key to save

and return.

(diagram 3.11)

ZONE1

MOVE TO LEFT POSITION

IRIS+: SAVE AND NEXT STEP

IRIS-: CANCEL

ZONE

TITLE RANGE CLR

1. ---------------------------- --------<┘ [<┘]

2. ---------------------------- --------

<┘ [<┘]

3. ---------------------------- --------

<┘ [<┘]

4. ---------------------------- --------

<┘ [<┘]

5. ---------------------------- --------

<┘ [<┘]

6. ---------------------------- --------

<┘ [<┘]

7. ---------------------------- --------

<┘ [<┘]

8. ---------------------------- --------

<┘ [<┘]

RETURN

ZONE1

MOVE TO LEFT POSITION

IRIS+: SAVE AND NEXT STEP

IRIS-: CANCEL

ZONE1

MOVE TO RIGHT POSITION

IRIS+/IRIS-: SAVE AND

RETURN

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 122 123

Sin comentarios

EverFocus EPTZ3150 Manual de usuario Pagina 51