EverFocus EDR1620 Manual de instrucciones descargar pdf (Pagina 37)

N.O. Trans.: When the alarm is triggered, buzzer starts to function no matter how

long the alarm duration is set until you set it back to N.O.

N.C. Trans.: When the alarm is triggered, buzzer starts to function no matter how

long the alarm duration is set until you set it back to N.C.

¾ LOG

YES: Select YES if you wish to record Alarm Events in the Log.

NO: Select NO if you do not wish to record Alarm Events in the Log.

¾ ACTIVE CAMERA: This field is to activate camera you want to have the alarm

enabled too. For example if you had an external motion detector on camera one

you would set this option to camera one. The Default from the factory is set to on.

To change this, simply use the Jog Dial on the DVR to make your selection.

Active camera setting, from camera 01~16. You can set the camera which

corresponds to the place where the alarm is located.

Note: The recording camera number in an event depends on the alarm number, and

the active camera images will not be recorded. Example: You assign camera 3 as the

active camera to alarm 1. When the alarm 1 is triggered, camera 3 will be displayed

and camera 1 will be recorded.

¾ PTZ PRESET: Select PTZ PRESET from “001” to “255”, so that when Alarm

occurs, speed dome will turn to this preset position for event recording. This function

improves surveillance quality of an alarm event. If you wish to disable this function,

please simply select “OFF”.

¾ DURATION: The amount of time an alarm event will record - from 1 sec to 99

seconds. The default value is 5 seconds.

¾ ALARM OUTPUT: This will transmit a signal to another device. The setting of

alarms are NONE = not activated, 1 = output signal 1 transmitted, 2 = output

signal 2 transmitted, 3 = output signal 3 transmitted and 4 = output signal 4

transmitted.

¾ ALARM EMAIL: Select “YES” for sending an email when alarm occurs. The

email address can be set in the NETWORK SETUP MENU.

¾ BUZZER: Audible alarm buzzer.

ENABLE: To enable an alarm buzzer.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 147 148

Sin comentarios

EverFocus EDR1620 Manual de instrucciones Pagina 37