EverFocus EDVR 9D1 Manual de instrucciones descargar pdf (Pagina 82)

7.7 SIMPLE ONE TO ONE CONNECTION

Crossover Ethernet Cable Pin outs:

The Figure below shows the pin configurations for a cross-over cable.

Connection Procedure:

 The First step is to purchase or make a cross-over cable. We recommend purchasing one if you

have never made a cross-over cable. Please remember you can not use a straight through network

cable for this application

 Once you have a cross-over cable plug one end into the LAN port on the back of the DVR and the

other into the network card on the back of the computer.

 Log into the EverFocus DVR menu and go to the Network Setting Menu.

 You must use the Static IP option for this type of connection.

Cat 5

Cross-over-cable

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 104 105

Sin comentarios

EverFocus EDVR 9D1 Manual de instrucciones Pagina 82