EverFocus EDVR 9D1 Manual de instrucciones descargar pdf (Pagina 49)

5.5 ALARM & EVENT SETTING

Figure 5.12 is a screen shot of the ALARM & EVENT SETTING MENU. This menu will walk you through

alarm and event setup.

Figure 5.12 (Alarm & Event Menu - Alarm)

5.5.1 Alarm

Alarm: Select the alarm number.

Enable: Check box to enable alarm.

Log: Check box to record alarm events in the log.

Input Type: This field is to change the type of alarm trigger.

N.O.: Normal Open contact.

N.C.: Normal Close contact.

Name: Assign a name for the alarm input.

Active Camera: This field is for assigning the alarm to a specific camera. For example if you had an

external motion detector on camera one you would set this option to “1”.

PTZ Preset: Select PTZ Preset from “0” to “255”. If the Active Camera is a PTZ speed dome, the alarm will

move the camera to a preset position for event recording. This function can improve surveillance quality of

an alarm event.

Alarm Output: This will transmit a signal to another device. It can be set to either “NONE” (not activated)

or “1” (output signal 1 transmits).

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 104 105

Sin comentarios

EverFocus EDVR 9D1 Manual de instrucciones Pagina 49