EverFocus EDVR 9D1 Manual de instrucciones descargar pdf (Pagina 61)

5.9 SYSTEM SETTING

Figure 5.23 is a screen shot of the SYSTEM SETTING MENU. This menu is for setting up the system

configurations of the DVR. There are 6 subentries in the SYSTEM SETTING MENU: Date/Time, Daylight

Saving, User, Security, I/O Control and Firmware & Misc.

Figure 5.23 (System Menu – Date/Time)

5.9.1 Date/Time

Time Zone: You can set the time zone that the DVR adjusts to when updating from the time server.

Date: Set current Date.

Time: Set current Time.

Date Format: Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.

Time Format: Change time format between 12H and 24H mode.

NTP Update Interval: The frequency that the system updates the correct time automatically when network

is connected. Select either Off, Daily, Weekly, or Monthly.

NTP Server: You can set the time server address that the DVR connects to for time synchronize. To find a

compatible NTP address, please follow these steps:

a) Go to a PC that is connected to the internet.

b) Click on “START” -> “RUN” -> type “command” and press “OK”.

c) In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 104 105

Sin comentarios

EverFocus EDVR 9D1 Manual de instrucciones Pagina 61