EverFocus eDR400 Manual de instrucciones descargar pdf (Pagina 80)

EVERFOCUS ELECTRONICS CORPORATION

¾ Please Note: Make sure the modem is in bridge mode. If your Internet

Service Provider is BellSouth you will have a modem/router. BellSouth

provides a Westell modem that includes a built-in router. You will need to

disable the router functionality.

¾ The next step is to open ports within your router. Open virtual ports in

the router (Log into the router using a PC)

o EDR Ports to open: 80, 1111, 1600

o EDSR Ports to open: 80, 1111, 2222, 3333, 4444, 6666

 Please Note: If your Internet service provider blocks port 80 you

may use a different port to access the DVR through the routers

UPNP forwarding (Linksys feature) or Virtual Server (D-Link

feature). This will be addressed in the next two chapters.

¾ If you have a Dynamic IP address and have open the ports simply go to

Chapter 9 to Configure DDNS.

¾ Once you have reached this point and you have restarted the digital

recorder.

¾ To access the DVR from a computer simply open Internet Explorer and

in the address bar type:

http:// and the IP address of your internet service provider.

 Please Note: If your Internet service provider blocks port 80 you

may use a different port to access the DVR through the routers

UPNP forwarding (Linksys feature) or Virtual Server (D-Link

feature). This will be addressed in the next two chapters.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 111 112

Sin comentarios

EverFocus eDR400 Manual de instrucciones Pagina 80