EverFocus eDR400 Manual de instrucciones descargar pdf (Pagina 70)

EVERFOCUS ELECTRONICS CORPORATION

Simple One to One Connection

Cat 5

Cross-over-cable

Crossover Ethernet Cable Pin outs:

The Diagram below shows the pin configurations for a cross over cable.

Diagram 31

Connection Procedure:

¾ The First step is to purchase or make a cross over cable. We recommend

purchasing one if you have never made a cross over cable. Please

remember you can not use a straight through network cable for this

application

¾ Once you have a cross over cable plug one end into the LAN port on the

back of the recorder and the other into the network card on the back of

the computer.

¾ Now Log into the Everfocus DVR menu and using the jog dial from the

previous chapter go to the Network Setting Menu. (See page 28 for more

instructions)

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 111 112

Sin comentarios

EverFocus eDR400 Manual de instrucciones Pagina 70