EverFocus ECOR 264x1-4 Manual de instrucciones descargar pdf (Pagina 75)

Alarm Action Setting from front panel

1. Enter Alarm Action setting mode: press “Enter” button to enter Alarm Action setting mode. At this

time, the whole editing area at lower-right side will be highlighted within a gray frame. See below

image.

2. Enter alarm selection mode: Use Up/Down arrow key to switch to Alarm selection mode.

3. Selecting alarm: Use Right/Left arrow key to select an alarm to configure. Selected alarm number

will be highlighted by a blue frame. See above image.

4. Enter time bar editing mode: Use Up/Down arrow key to switch to time bar editing mode. When

this mode is selected, all 9 time bars will be highlighted within a blue frame.

5. Select desired time bar for setting: press Enter button, the first time bar will be selected for

setting and highlighted in a red frame. See below image. Use Up/Down arrow key to desired time

bar for setting.

6. Editing blocks in a time bar: when a time bar is selected (highlighted in red frame), press Enter

button, then the first block of this bar will be selected (highlighted in blue frame). Use Right/Left

arrow key to switch to desired block as starting time, and press Enter button again to confirm. At

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 127 128

Sin comentarios

EverFocus ECOR 264x1-4 Manual de instrucciones Pagina 75