EverFocus ENVR8304E Manual de usuario descargar pdf (Pagina 68)

ENVR8304D-8CH / ENVR8304E-8CH

6.1 Camera

If the NVR doesn’t detect any IP cameras, the Basic, PTZ, Tracking, Pattern Tour and Adjust

setting pages cannot be used. Therefore, make sure the IP cameras are properly connected to

the NVR via the Smart Switch.

6.1.1 Camera Status

This page displays connected IP cameras’ status and also allows users to modify the ID and

Password of the IP cameras.

Figure 6-2

Channel: Displays the channel number.

Name: Shows the name of the connected IP camera.

Frame Rate: Shows the current frame rate of the connected IP camera.

Bit Rate: Shows the current Bit Rate of the connected IP camera. If the total bit rate is over

56 Mbps, it will show a warning at this setting page as above.

PoE Power: Shows the current Bit Rate of the connected IP camera.

Status: Shows the connection status.

Record: Shows the recording status.

Modify: Click to bring up the following window and you can modify the ID and Password of

the connected IP camera.

Figure 6-3

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 176 177

Sin comentarios

EverFocus ENVR8304E Manual de usuario Pagina 68