EverFocus EDN Series Manual de usuario descargar pdf (Pagina 15)

EDN2160/2260/2560

4.4 Wall-Mount Installation Using a Dome Bracket

You can optionally install the camera onto the wall using a Dome Bracket (BA-ED).

1. Remove the Top Cover and Bracket Plate from the Dome Bracket.

Top Cover

Bracket Plate

2. Drill two small holes on the wall and insert the supplied two Anchors into the holes. Drill another

hole on the wall only if you wish to run the cables through the wall. Attach and screw the Dome

Bracket to the wall using the supplied two Long Screws. Note that the distance between the ceiling

and the Dome Bracket should be more than 10 cm.

Wall

Ceiling

> 10 cm

Hole

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 72 73

Sin comentarios

EverFocus EDN Series Manual de usuario Pagina 15