EverFocus EDN Series Guía de instalación descargar pdf (Pagina 8)

EDN Series

4. On the back side, make sure the black plastic clips are slightly above the ceiling board and

pointing outward.

5. Tighten the bracket screws from the front side of the camera.

6. Connect the network, power and other cables to the camera. Refer to 2. Cables.

7. Optionally insert a micro SD / SDHC card to the card slot. See No.5 in 1. Overview.

8. Access the camera live view. See 4. Accessing the Camera. Or using the Test-Out cable to

connect a monitor to the camera for setting image aim and focus.

9. Adjust camera lens and angles. See Step 11 in Wall-Surface Mount.

10. Secure the cover back to the camera.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

EverFocus EDN Series Guía de instalación Pagina 8