EverFocus EAN Plus Series Guía de instalación descargar pdf (Pagina 4)

EAN Plus Series

2. I/O Terminal Block

The I/O terminal block, located on the rear panel of the camera, can be used to develop application

for alarm input and output.

1 2 3 4

Pin Assignment

No. Function No. Function

1 Alarm COM 3 Alarm Input

2 Alarm Output 4 Digital GND

3. Installation

This installation guide provides the basic instructions on installing an EAN Plus box IP camera. For

details, please refer to the User’s Manual in the software CD.

3.1 Lens Installation and Adjustment

You can install either a CS-mount or a C-mount lens into the camera. It is recommended to use a

lens with aperture ratio of F/1.4 or smaller. Please refer to the following reference steps.

C-Mount Lens Adapter

DC Auto Iris Lens Connector

Focus Screw

Zoom Screw

CS-Mount Lens:

1. Remove the cover cap from the camera body.

2. Install the lens into the camera body.

3. Adjust the lens using the Focus / Zoom crews.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

EverFocus EAN Plus Series Guía de instalación Pagina 4