
switch from DAY mode to NIGHT mode. Selectable values are 0~63.
•NIGHT
DAY:
When the camera detects the current light level is higher than this value, it’ll
switch from NIGHT mode to DAY mode. Selectable values are 0~63.
NOTE:
1. The difference in the selected values of DAY NIGHT and NIGHTDAY
should be more than 5, or else the camera will keep switching from DAY
NIGHT and NIGHTDAY constantly.
2. It is not recommended to use an infrared illuminator when the camera is in
DAY/NIGHT > AUTO mode.
•DELAY TIME:
The Delay Time will keep the camera from unnecessarily switching
between Day and Night modes when there is a sudden and short change in
the light levels. The camera will switch from one mode to the other only if a
switch-inducing change in light levels stays the same for the selected
number of seconds. The selectable values are 0 to 255 seconds.
•BURST :
Turn the BURST function off to reduce the color noise when the camera
switches to B&W mode. If the camera cannot switch back to COLOR mode
from B&W mode, please turn the BURST function on.
NOTE:
The BURST function can also be switched on/off in the B&W mode’s submenu.
4.7 IMAGE
Scroll to the IMAGE > SET line and press ENTER to open the settings submenu.
RESOLUTION
Options are HIGH, MIDHIGH, MID, MIDLOW, LOW, and OFF.
The IMAGE > SET submenu.
s Menu
||||||||||||||||||||| 010
||||||||||||||||||||| 010
||||||||||||||||||||| 000
||||||||||||||||||||| 000
||||||||||||||||||||| 000
Comentarios a estos manuales