EverFocus PARAGON264x1 Manual de usuario Pagina 67

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 99
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 66
60
5.10 INFORMATION
Below is a screenshot of the INFORMATION MENU. This menu displays important (read only) system information.
5.10.1 System
System
Version: Displays the firmware version number.
Model: Displays the DVR model number.
NTSC/PAL: Displays the current video format (i.e. the format
that was auto-detected on the Channel 1 input during boot-up).
Network
IP: Displays the DVR’s current IP Address as set in the Network or Express Setup screen.
MAC: The unique address of the DVR’s internal network card. This option cannot be changed.
DVR Name: Displays the DVR’s DDNS name, if configured.
Network ID: The ID number for the PowerCon alarm network as set in the Alarm Server screen.
Status
Disk: Displays the status of the installed disk(s); normal disk operation is indicated by “OK”.
Fans: Displays the status of the fans; normal fan operation is indicated by “OK”.
5.10.2 Log
This screen is used to choose, display and/or export log
entries.
From
Date: Select starting date of log to be displayed.
Time: Select starting time of log to be displayed.
To
Date: Select end date of log to be displayed.
Time: Select end time of log to be displayed.
Log Type:
Configurations: to see log entries related to configuration changes.
Event: to see log entries related to events.
Record: to see log entries related to recording changes.
Operation:
to see log entries related to operation changes.
Vista de pagina 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 98 99

Comentarios a estos manuales

Sin comentarios