EverFocus PARAGON264x1 Manual de usuario descargar pdf (Pagina 48)

see the Alarm Server section for more information.)

Alarm Output: Click on one of the numbers in the dropdown box to let the DVR transmit a signal through the alarm output

with the same number, if this event occurs. Selecting “None” would disable this reaction.

Output Type: If an Alarm Output has been selected above this setting, this setting will decide how that Output is transmitted

when this event occurs.

Timeout: The alarm output will last for a set period of time. If this option is selected, a field will appear under this field

for setting the period duration. Setting options are 1~150 seconds.

Permanent: The alarm will remain on until the user presses the “Enter” key on the front panel, or resets the alarm

configuration.

Transparent: The alarm output will continue for as long as the event trigger is detected.

Trans+Timeout: The alarm output will continue as long as the event trigger is detected, then it will continue for the set

time period.

Timeout Duration: This period refers to the Timeout output type above and can be from 1 to 150 seconds.

HD Off:

Buzzer: By default, the DVR’s buzzer will automatically

start buzzing if the hard drive is turned off, or disconnected,

or becomes disabled (cannot be detected by the system).

Email Notify: Check this box to enable email notification

when this event occurs. This requires that valid email

settings have been entered in the Network Setting > Email

setup screen.

Network Alarm: Check this box to send out a network

alarm to a client PC when this event occurs. (This feature

requires PowerCon software on the client PC and proper

settings for the Alarm Server in the Network Setup menu;