EverFocus NVR Manual de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 102
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
NVR8004X
76
4.7.6 Miscellaneous
You can upgrade the latest firmware, restore the factory default settings to the NVR,
upload / save the NVR configuration settings from / to the USB / computer or change the
language in this setup menu.
Figure 4-49
Remote Reboot: Click Reboot Now to restart the NVR via the Network.
Firmware: Shows the current firmware version of the NVR.
Firmware Upgrade: Click Browse to choose the firmware file and click Upgrade to upgrade
the latest firmware.
Configurations
Load Factory Default: Click to restore the NVR to factory default settings. The User
Account, Network IP Settings, and Time settings will not be affected.
Load From File: Click Browse to choose the NVR configurations file and Click Load to
upload the NVR configurations.
Save To File: Click to save the NVR configurations to the file.
Language: Choose which language the NVR uses.
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 101 102

Comentarios a estos manuales

Sin comentarios