EverFocus ECOR 4 Manual de instrucciones descargar pdf (Pagina 44)

5.3.3 Motion

Figure 5.6 (Camera Menu – Motion)

Camera: Select the camera you wish to adjust. “Title” will change to the title name of the selected camera.

Enable: Check box to enable motion detection. Other motion options will not be available unless this

feature is selected.

Log: Check box to record motion events in the log.

Sensitivity: Allows users to adjust motion detection sensitivity. Level 10 is the lowest setting, and level 1 is

the highest. The default is level 5.

Alarm output: This will transmit a signal to another device. It can be set to either “NONE” (not activated) or

“1” (output signal 1 transmits).

Output Type: Output action when alarm is triggered.

Timeout: Alarm output lasts for the set time duration.

Permanent: Alarm will remain on until user presses “Live” key on front panel.

Timeout Dur: Time duration selectable from 0 to 150 seconds.

Buzzer: Check box to enable buzzer when a motion event is detected.

Email Notify: Check box tosend email notification function when a motion event is detected.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 106 107

Sin comentarios

EverFocus ECOR 4 Manual de instrucciones Pagina 44