EverFocus EDSR100M Manual de usuario descargar pdf (Pagina 10)

Connect the Camera

Connect the power connector from the camera harness into the CAM ERA POWER OUT jack on the back panel

of the DVR.

Adjust the camera. After the camera is installed, connect a monitor directly to the camera and observe the image.

Make any adjustment necessary.

Installing the Camera and Monitor

The DVR is typically connected to one camera installed inside the car.

For installation procedure, refer to the guide

that came with the camera you purchased.

The Monitor power supply connect from the Automotive adapter(cigarette plug)

Monitor and cameras must be purchased separately.

LCD Monitor

Quick Install Guide

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 61 62

Sin comentarios

EverFocus EDSR100M Manual de usuario Pagina 10