EverFocus 350HQ Especificaciones

EVERFOCUS 1/3” 560 TVL High Resolution Color Rugged Dome Camera Operation Instructions Model No. EHD350 Please read this manual first for correc

9DIP SWITCH FUNCTION LL (Line-Lock) OFF/ON To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on). Set the line-lock

10BLC (Back Light Compensation) ON/OFF When BLC is turned on, the AGC, ES and IRIS operating points are determined by averaging over the center area

11SIMPLE INSTRUCTIONS FOR THE DESICCANT PACK Due to the camera lens blurred from the humidity inside the camera. The desiccant pack absorbs the humi

12 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380

1the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the camera lens. 7. Do not operate the camera beyond the spe

2z Desiccant Pack x 1 z Manual x 1 Optional Accessory z Wall Mount Bracket (BA-EHD) SPECIFICATIONS Pickup Device 1/3'' SONY Super HAD

324VAC: 20.5VA max. (heater ON ) 12VDC: 3.5W max. (heater OFF ) 12VDC: 11W max. (heater ON ) Dimensions 130mm(W) x 98.8mm(H) x 130mm(D); 5.1"(W)

4 2. Remove the camera. To remove the camera, first unplug the wire connection on the back of the camera. Then loosen the 2 locking screws on

5 Attach the base to the wall or ceiling, fix the base by the 4 setscrews attached in the accessory pack. The dome is weighted 1.7kg, please make sur

6 4. Re-assemble Camera 1. When mounting COLOR RUGGED DOME CAMERA on the wall, please aim the “Wall” in line with the triangle “S” marked on the lea

7 5. Wire Connection Connect the power supply cable (AC24V/DC12V), video output and alarm output to the proper connectors shown as Fig

86. View Angle Adjustment The camera can be rotated 360° horizontally, 140° vertically and 60° 3’rd axis view angles (as shown in Figure 8). Adjus